|
Sabre Tech & Modifications
Kuryakyn
Brake Pedal Cover #8027
by "Fuzzy"
I have found a cover for
the brake pedal on our Sabres that works pretty well with a little modification.
- Remove about a 3/16"
off the top and bottom of the pedal with a 4" grinder,
- Take a Dremmel tool
and modify the Kuyrakyn cover, #8027, where the slot for the arm goes, basicly,
open it up so it sits straight.
All in all, this takes about
15 minutes, real easy to do and looks great.
|
|
If you'd like to add a
modification/install/trick or tip? Send pictures/text to:
webmaster@otnusa.com
Disclaimer: Any person who decides to perform any of the above listed modifications, does so at their own risk.
The Sabre Group does not claim any responsibility for damage to your motorcycle or individual.
